Automatic Cigarette Making Machines 90 Mm Tobacco Rod Length With
MK9 Maker
Highlights:
1. It adopts AC servo driving system that simplifies the mechanical
structures and reduces the failure and maintenance cost, and
improves the transmission precision.
2. The complete suction system and high air pressure system .
3. Man-machine interface: The SIEMENS touch screen provides
friendly man-machine interface, which displays the machine status
and production data precisely. It is also convenient to modify the
system parameter and check out the failure.
4. The cigarette cutting system uses the double-knife
single-cutting system with lower-rise temperature and lower noise.
This gives the very good quality of the cigarette cut.
5. The timing belts are used instead of the gears, so the even
tobacco-feeding is greatly improved and the maintenance cost is
reduced as well.
Main Parameters:
Output: 5000cig/min for the king size cigarettes | Frequency: 50Hz |
3500cig/min for the super slim cigarettes | Total power: 50KVA |
Cigarette parameter | Outside dimensions |
Filter-cigarette length: 65 ～110± 0.5 mm | Cigarette maker : 3630× 1270 × 1870mm |
Tobacco rod length: 55 ～90 mm | Plug assembler: 3340×1340× 1820mm |
Cigarette diameter: φ 5.4 ～φ 9.0 mm | Tray Filler : 2350×2400× 2100mm |
Power supply: 380V ± 10%(3phases) | Total weight: 8600kg |
Making Process Requirements:
1, Ambient conditions
Temperature: 20℃--30℃
Relative humidity: 62％--68％
2, Paper bobbin
Tensile strength ≥0.85KN/m
Extensibility ＞1.6％
Humidity: 6％±1.5％
Joint number ＜1/1000 m
3, Width: 48±0.3 mm
Thickness: 0.04mm～0.05 mm
4, Cut tobacco
Grade: A
Humidity: 12.5％±0.5％
5, 5.5bar
6, Viscosity of VPA
For the maker: 2500mPa.s-5000mPa.s
For the assembler: 5000mPa.s-10000mPa.s
