C (J,K,P) 6E Series of Electronic weighing conveyor Tobacco
Processing
Application:
This product is a dynamic weighing machine.It is used in the
tobacco primary processing line and threshing and redrying line for
achieving accumulating metering flow rate control,materials
blending and quantitative control.
Features:
- Adoption of direct stress transfer structure ,featuring more
direct and reliable stress transfer and good stability of whole
machine.
- Conveying and weighting frame adopting cantilever support,more
convenient for belt replacement within 30 minutes.
- The sensor installed on the two sides of frame,more convenient
for commissioning and replacement.
- Unique tension device.Advance-stroke and return-stroke tension
rope in parallel to make the zero point stable,movable counter
weight on the tension hammer to resolve the problem such as
deflection load and off tracking of belt.
- Double carrier roller whit strong anti-interference ability.
- High metering accuracy.Direct stress ,double carrier roller and
no-weighing frame structure for eliminating the influence on
metering accuracy due to horizontal component force arise from the
belt movement ,the effective length of weighting parts is also
favorable factor for increasing metering accuracy.
- Wide adjustment range for blending ratio.
- PLC control with touch screen and HMI for convenient operation
and a=maintenance.
Automatic deflection,fault recording ,modula fault detecting
,weight signal fault detecting ,speed signal fault
detecting,frequency inverter fault detecting ,electrical push rod
position displaying ,automatic coefficient calculation of weighing
calibration,applicable for diversified communication and interface.
Technical Specifications:
- Rated capacity: 300kg/h~1200kg/h
- Width of conveying
belt:B=600mm,800mm,1000mm,1200mm,1400mm,1600mm,1800mm
- Distance between the centre of drive rollers:Lo=2780mm;Lo=3000mm
- Length of metering section :L=1000mm
- Sensor range:G=4*6kg, 4*10kg, 4*30kg
- Metering accuracy: ≤0.5 %
- Control accuracy: ≤1 %
